ControlDesk 3.2.1p1                                        July 2008
Last-Minute Information
======================================================================
Copyright (c) 2008 dSPACE GmbH, Germany


Contents:

1. General
2. Problems Fixed by This Patch
3. Limitations
4. Installing the Patch


1. General
----------------------------------------------------------------------
This patch can only be installed on an existing ControlDesk 3.2.1
installation (dSPACE Release 6.1).


2. Problems Fixed by This Patch
----------------------------------------------------------------------

a. CAN Navigator
 
   - GMOutPrcU.exe consumes memory when a CAN Configuration is open
     and online.

   - Opening a CAN configuration does not open the related model (SDF
     file) if they are stored on different volumes (drives).

   - The CAN Navigator does not prompt the user to save the changed
     CAN configuration when the experiment is being closed.


b. Parameter Editor

   - Parameters are always written with 17 decimal digits, even if
     they are all zero.

   - It was not possible to switch off the parameter check. Now it
     can be activated and deactivated using the Parameter Editor
     menu option Enable Parameter Check. Parameters which size does
     not match the variable description, as well as read-only and
     disabled parameters, are not written to a real-time platform
     when the parameter check is enabled.


c. Instrumentation

  - Layout scrollbars are sometimes missing.


d. Automation

   - CDAutomationLib does not raise an exception when nonexistent
     parameters are written.


e. Platform Management

   - The DS1005 Loader does not handle the "NOTES" section properly.

   - The flash of DS1401 cannot be cleared after an application has
     been downloaded, if the flash had been previously improperly
     formatted.
    

f. Miscellaneous

   - An incorrect error message is returned if the animation mode is
     selected when no processor board is assigned.

   - APH (Advanced Parameter Handling) does not support umlauts in model
     paths.

     
3. Limitations
----------------------------------------------------------------------

No known limitations of this patch.



----------------------------------------------------------------------
End of File