dSPACE SystemDesk 2.1 and SystemDesk 3.0                       February 2011
Last-Minute Information
============================================================================
Copyright (c) 2011 dSPACE GmbH, Germany


Contents:

1.  General
2.  Improvements & fixed Problems
3.  Installation
4.  Installed files


1. General
----------------------------------------------------------------------------

This Setup will install files for the migration. These files will allow you 
to export projects from SystemDesk 2.1p6 respectively import these projects 
in SystemDesk 3.0p1 and SystemDesk 3.0p2.
In the zip-file you will find the following files:
    SystemDeskMigration_2.1_to_3.0.exe
	SystemDeskMigrationGuide.pdf
	Changes_2.1p6_to_3.0p1_3.0p2.txt
	ReadMe_MigrationSetup.txt (this file)


2. Improvements & fixed Problems
----------------------------------------------------------------------------

- Restoration of init values for instance or shared calibration parameters 
  will no longer end in an exception.
- Restoration of interface delegation connections for ports whose 
  interfaces were renamed will no longer cause error messages or wrong 
  interface delegations.
- Restoration of init values of sender or receiver interfaces and 
  calibration interfaces will work properly now.


3. Installation
----------------------------------------------------------------------------

To run the migration setup, you must be logged on with administrator rights.
Close your SystemDesk application and simply run 
‘SystemDeskMigration_2.1_to_3.0.exe’.
The setup will automatically locate your SystemDesk versions and installs 
the files at the designated location.

After the installation finished open the migration guide 
('SystemDeskMigrationGuide.pdf') and follow the instructions.


4. Installed files
----------------------------------------------------------------------------

The Setup will install the following files at the following locations:

SystemDesk 2.1p6:
    %\SystemDesk2.1\Tools\Migration\Migration_Export.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\__init__.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\AR_Renamer.exe
	%\SystemDesk2.1\Tools\Migration\SDMigration\AutosarRenamer.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\LibrarySync.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\LocalTypeConverter.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\MigrationHelper.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\SaveAllInitValues.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\SelectorVsSwc.py
	%\SystemDesk2.1\Tools\Migration\SDMigration\SystemDeskHelper.py

SystemDesk 3.0p1/3.0p2:
    %\dSPACE SystemDesk 3.0\Tools\Migration\Migration_Import.py
	%\dSPACE SystemDesk 3.0\Tools\Migration\SDMigration\__init__.py
	%\dSPACE SystemDesk 3.0\Tools\Migration\SDMigration\MigrationHelper.py
	%\dSPACE SystemDesk 3.0\Tools\Migration\SDMigration\RestoreAllInitValues.py
	%\dSPACE SystemDesk 3.0\Tools\Migration\SDMigration\SelectorVsSwc.py
	%\dSPACE SystemDesk 3.0\Tools\Migration\SDMigration\SystemDeskHelper.py

----------------------------------------------------------------------------
End of File